11
• Press the Bluetooth Connect Button
to connect to a nearby device via
Bluetooth connection. Once the device
is paired, press the Bluetooth Input
Button to choose this as the audio
input source.
NOTE
If your music device does not support a PIN code connection, you
can disable the PIN by pressing the selection buttons.
Please use the PIN-secured connection when possible. VTech
strongly recommends keeping the PIN security on for the
use of Bluetooth transmission to avoid any connection by an
unauthorized device. The disabling of the PIN security should
only be used when the connection of an external device with
PIN security is impossible. The use of the toy when PIN security
has been disabled should be under the supervision of an adult.
• Use the Crossfader to adjust the
volume balance between your selected
audio source and the system’s built-in
sounds.
NOTE
When playing audio wirelessly through the system, we suggest
you only adjust your smart device’s volume using the Crossfader
on the KidiStar DJ Mixer™ system. For best performance, set
your device’s volume to 100% with the Crossfader in the middle
position to get started.
To Next Page
Loading...
Need help?
General