7
POWER ADAPTER CONNECTION
• Make sure your KidiStar DJ Mixer™ is turned off.
• Locate the AC Adapter Jack on the side of the unit.
• Connect an AC adapter (not included) to the AC Adapter Jack.
• Plug the adapter into a power outlet.
• Press the Power Button to turn the system On.
Note: When the toy is not going to be used for an extended period of
time, unplug the adapter.
TRANSFORMER SAFETY NOTICE
• Using a 3.5mm AC 6V power adapter (not included) that complies
with EN61558 is recommended.
• This toy should only be used with a transformer for toys.
• The transformer is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
• Never clean a plugged-in toy with liquid.
• Please regularly examine the transformer, checking for damage
to the cord, plug, transformer or other parts. Do not use the
transformer if there is any damage to it.
To Next Page
Loading...
Need help?
General