VTech LS1350-B - Base Settings (Using Handset)

18
6.3 Base Settings (Using Handset)
6.3.1 Set the Base Ringer Melody
Press →
p
q
→ BS SETTINGS.
Press →
p
q
→ BS RINGER.
Press →
p
q
→ MELODY 1 - MELODY 5.
Press .
6.3.2 Set the Base Ringer Volume
Press →
p
q
→ BS SETTINGS.
Press →
p
q
→ RINGER VOLUME.
Press →
p
q
→ VOLUME 1 - VOLUME 5 / VOLUME OFF.
Press .
6.3.3 Set the Dial Mode
The default dial mode is best suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
Press →
p
q
→ BS SETTINGS.
Press →
p
q
→ DIAL MODE.
Press →
p
q
→ TONE or PULSE.
Press .
6.3.4 Set the Flash Time
The default ash time is best suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
Press →
p
q
→ BS SETTINGS.
Press →
p
q
→ FLASH TIME.
Press →
p
q
→ SHORT, MEDIUM or LONG.
Press .
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.