7
ASSEMBLY INSTRUCTIONS
With the Race & Learn Driver, safety comes first. Adult assembly
required. For your child’s safety, do not let them play with this toy until
it is fully assembled.
1. Locate the Yellow Support Legs and
insert them into the Driver base as
shown.
PRODUCT FEATURES
1. Ignition
Turn the Ignition right to the START
position to turn on the unit.
Turn the Ignition left to the OFF
position to turn off the unit.
2. Gear Stick
Change up to P (park) to stop the car.
Change down to 1 to start driving.
Change down to 2 to drive faster.
Change back up to 1 to drive slower.
To Next Page
Loading...
