VTech RM5766HD User Manual

39
Additional Information
Wall Mount (Optional)
Notes:
• Check for reception strength and camera angle of the baby unit before drilling the holes.
• The types of screws and plugs you need depend on the composition of the wall. You may
need to purchase the screws and plugs separately to mount your baby units.
1�
Place the wall mount bracket on a wall and then use a pencil to mark two holes
in parallel. Remove the wall mount bracket and drill two holes in the wall (7/32
inch drill bit).
2�
If you drill the holes into a stud, go to step 3.
If you drill the holes into an object other than a stud, insert the wall plugs into
the holes. Tap gently on the ends with a hammer until the wall plugs are ush
with the wall.

VTech RM5766HD Specifications

General

Camera	Yes
Night Vision	Infrared night vision
Two-way Talk	Yes
Temperature Sensor	Yes
Expandable	Up to 4 cameras
Sound Activation	Yes
Range	Up to 1, 000 feet
Lullabies	5 calming melodies and 5 soft ambient sounds
Power Source	Rechargeable battery
Parent Unit	Included
Camera Unit	Included
Display	5-inch color LCD screen
Battery Life	Up to 12 hours (video), 22 hours (audio only)