VTech RM9761 - Position the Camera

6
Position the Camera
Use the app to pan and tilt your camera.
Pair the Camera with your Mobile device
On Baby Plus App
Before you start...
• Connect your mobile device to a 2.4GHz Wi-Fi- network. This must be the same Wi-Fi
network as the camera will be connected to.
• Enable the Location Service of your mobile device for the purpose of camera setup.
With a 2.4GHz home Wi-Fi network for pairing...
You can start to pair the camera with your mobile device by following the instructions in the
app. Upon successful pairing, you can hear and watch your baby via your mobile device.
Tips:
• Move the camera and the Wi-Fi router closer to each other in order to strengthen the network
signal.
• It can take up to approx 1 minute to search for the camera during set up.
>
3ft (1m)
> 1m
After installing the MyVTech Baby Plus App...
• Sign up for an account
• Pair the camera with your mobile device
• Monitor your baby using a wide range of features, such as changing the night light colour, playing
lullabies, talking to your baby, panning and tilting the camera, and much more
Start monitoring from anywhere.
Download the free MyVTech Baby Plus mobile app and install it on a mobile device, then use your mobile
device and the mobile app to monitor remotely.
Download app for mobile access
App Compatibility
• Android
TM
9.0 or later
• iOS 14 or later.
P
L
U
S
P
L
U
S