SIP contemporary cordless 2-line - S2420
Telephone operation
Conference call
6JKUVGNGRJQPGCNNQYUVJTGGYC[EQPXGTUCVKQPU
To initiate a conference call:
2NCEGCECNNVQVJGſTUVRCTV[
Press HOLDVQRNCEGVJGſTUVRCTV[QPJQNF
2NCEGCUGEQPFECNNQPVJGQVJGTNKPG
Once the second party is on the line, press CONFVQUVCTVCVJTGGYC[EQPHGTGPEG
To initiate a conference call while both calls are on hold:
Press CONFVQUVCTVCVJTGGYC[EQPHGTGPEG
To switch a conference call from the telephone base to the cordless handset:
During a conference call on the telephone base, press
/SPEAKER or CONF QPVJGEQTFNGUUJCPFUGV
During a conference call on the telephone base, press HOLD on the telephone base and then press CONF on the
EQTFNGUUJCPFUGV
To switch a conference call from the cordless handset to the telephone base:
During a conference call on the cordless handset, press
/SPEAKER or CONF QPVJGVGNGRJQPGDCUG
During a conference call on the cordless handset, press HOLD on the cordless handset and then press CONF on the
VGNGRJQPGDCUG
To end a conference call:
Press VJGNKPGMG[VJCV[QWYCPVVQOCKPVCKPEQPPGEVKQPCPFVJGQVJGTNKPGYKNNDGFTQRRGF
When the conference call is at the telephone base, press
/SPEAKER or CONF QPVJGVGNGRJQPGDCUG
When the conference call is on the cordless handset, press OFF on the cordless handset, or place it back in the telephone base,
charging base or charging stand
When there is more than one cordless JCPFUGVQPVJGEQPHGTGPEGECNNVJGECNNGPFUYJGPCNNJCPFUGVUJCPIWR
Find handset
7UGVJKUHGCVWTGVQſPFCNNTGIKUVGTGFEQTFNGUUJCPFUGVU
To start paging:
Press
/FIND HANDSET QPVJGVGNGRJQPGDCUGYJGPVJGRJQPGKUPQVKPWUG#NNKFNGEQTFNGUUJCPFUGVUDGGRHQTUGEQPFU
To end paging:
Press
/FIND HANDSETCICKPQPVJGVGNGRJQPGDCUG
-OR-
2TGUUCP[MG[QPVJGJCPFUGVVQUVQRVJGRCIKPIVQPG
Computer port
You can route your computer through the COMPUTERRQTV4,QPVJGUKFGQHVJGVGNGRJQPGDCUGVQIGV+PVGTPGVCEEGUU
USB port
The
port on the side of the telephone base can be used for charging devices WRVQO#"8 Charging will be suspended
YJGPVJGTGKUCPKPEQOKPIECNNQTVJGVGNGRJQPGKUKPWUG
•
•
•
•
•
•
•
•
•
•