3
Getting Started
Parent unit installation
The package comes with two rechargeable batteries. You can
power up the parent unit by using two rechargeable batteries
or by connecting it to the mains power. However, even if the
parent unit is connected to the mains power, we recommend
you to also install the rechargeble batteries. This guarantees
the continual operation in case of a power outage.
To set up the parent unit:
Remove the battery compartment cover.
Install the supplied rechargeable batteries into the battery
compartment, matching the polarity markings (+ and -).
Replace the battery compartment cover.
Insert the DC plug of the other power adapter into the DC
socket on the side of the parent unit.
Connect the other end of the power adapter to a suitable
mains power socket.
The Charging LED lights up indicating the parent unit is
charging.
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
