EN - 10
4. Once installed, the telephone begins a four-step initialization and system registration process.
(1) The MUTE key and SPEAKER turn on and then go off.
(2) The MUTE key flashes.
(3) The MUTE key stops flashing and then SPEAKER flashes.
(4) The MESSAGE WAITING LED, LINE, MUTE and SPEAKER illuminate for 500ms when
initialization and system registration are successful.
If the system registration fails, SPEAKER blinks twice every second. To reset, disconnect the
Cat-5 network cable from the network wall jack with Power over Ethernet (PoE) and connect it
back again.
CAUTION:
• Use only the supplied Cat-5 network cable. Cat-5 network cable is not designed for use in any
other IT devices. Misuse of Cat-5 network cable on your other IT devices shall be prohibited.
• To order a replacement, visit our website at www.vtechhotelphones.com or contact your local
distributor.
To Next Page
Loading...
Need help?
General
