VTech SIP Contemporary Series User Manual

EN - 13
English
Using the corded handset and the
telephone base
The corded handset and the telephone base
speakerphone cannot be used at the same
time. However, calls can be switched between
the corded handset and the telephone base
speakerphone.
Receive a call
When there is an incoming call, the telephone
rings and the LINE key flashes.
To answer a call using the corded handset:
Lift the corded handset from the telephone
base. The LINE key illuminates when the phone
line is in use.
To answer a call using the telephone base
speakerphone:
On the telephone base, press the LINE key or
SPEAKER . The LINE key illuminates when
the phone line is in use. The SPEAKER key
illuminates when in speakerphone mode.
Place a call
Lift the corded handset from the telephone
base or press the LINE key or SPEAKER .
Listen for a dial tone and then dial the desired
number, or press a Speed Dial key to dial a
programmed number. The LINE key illuminates
when the phone line is in use. The SPEAKER
key illuminates when in speakerphone mode.
End a call
Place the corded handset on the telephone
base, or press the LINE key or SPEAKER if you
are in speakerphone mode.
Switch a call between the corded
handset and the telephone base
• To switch a call from the corded handset to
the telephone base speakerphone, press
SPEAKER , then place the corded handset
on the telephone base cradle.
• To switch a call from the telephone base
speakerphone to the corded handset
currently on the telephone base cradle, lift
the corded handset from the telephone
base cradle.
• To switch a call from the telephone base
speakerphone to the corded handset which
is not on the telephone base cradle, press
SPEAKER .
Volume
Listening volume and ringer volume can be
adjusted from the telephone base.
To adjust the listening volume:
During a call, press VOL+/ VOL- to adjust the
listening volume. The next call returns to the
default listening volume.
To adjust the ringer volume:
In idle mode, press VOL+/ VOL- to adjust the
ringer volume.
Message waiting indicator
When a voice message is received, the MESSAGE
WAITING LED on the telephone base flashes.
Play messages
Press the MESSAGES key in idle mode to play
messages.
Telephone operation
SIP contemporary 1-line hotel telephone CTM-S2212

VTech SIP Contemporary Series Specifications

General

Brand	VTech
Model	SIP Contemporary Series
Category	Telephone
Language	English