EN - 9
English
Installation
SIP contemporary 1-line hotel telephone CTM-S2212
Telephone base installation
Installation option - desktop position
1. Turn the telephone base over with the bottom side facing up. Connect the coiled handset cord
to the telephone base.
2. Insert the lower tabs of the mounting bracket into the lower grooves of the telephone base.
Press the upper tabs of the mounting bracket and then push into the center of the telephone
base until it locks into place.
3. Plug the Cat-5 network cable into the RJ-45 LAN port on the telephone base and the network wall jack.
Coiled handset cord jack
Cat-5 network cable
RJ-45 LAN port
Network wall jack with Power over Ethernet (PoE)
To Next Page
Loading...
