14
1. Connect and install
2. Overview
3. Setup
1. Follow the voice guide steps to set up the date and
time.
2. After the date and time is set, you can then select
one of the options.
Press
1 To record your own announcement.
2 To set up number of rings.*
3 To set up call screening.
4 To set message alert tone.
5 To set remote access code.
6 To change the date and time.
To repeat this menu options.
3. Follow the voice guide steps to complete the
respective set up.
* If you select Toll saver, the answering system ansers a call after two rings when you have new
messages, and after four rings when there are no new messages. This feature allows you to
check for new messages and avoid paying long distance charges when calling from out of your
local area.
Setup
To Next Page
Loading...
Need help?
General
