22
1. Connect and install
2. Overview
3. Setup
4. Operate
Temporary tone dialing
This telephone is set as touch-tone by default.
If you have pulse (rotary) service only, you can press to switch from pulse to
touch-tone dialing temporarily during a call. This is useful if you need to send touch-
tone signals to access your telephone banking or long distance services.
For permanent tone dialing setting
Enter the secret code to select Tone/Pulse dial
mode.
Tone to Pulse
Press *366# in idle mode, and you will hear a
confirmation tone.
Pulse to Tone
Press *367# in idle mode, and you will hear a
confirmation tone.
Operate
To Next Page
Loading...
