11
6. SWITCH BUTTON
Press the Switch Button to see
Overseer automatically switch
between T-Rex and robot.
7. AUTOMATIC SHUT-OFF
To preserve battery life, Overseer the T-Rex will automatically
turn off after several minutes without input. The Remote Control
can’t control Overseer the T-Rex during this period. Overseer
the T-Rex can be turned on again by pressing the Switch Button,
or by sliding the Power On/Off Switch from the Off position to the
On position.
Note:
The lights on the T-Rex’s nose will ash red three times and then
automatically turn off when battery power is low. Once this occurs,
please install a brand new set of batteries and try switching
Overseer off and on again.
521063 IM.indd 11521063 IM.indd 11 03/19/2021 11:54:4203/19/2021 11:54:42