17
Basic Operation
7 Press or to change the setting. Choose Y (Yes) if you wish the phone to
alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose N (No) for a normal ringing pattern.
8 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
Step 7, a D will be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL, an error tone
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in the Directory
1 Press
( ). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries stored in directory.
OR
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press SELECT.
Then press until EDIT flashes.
4 Press SELECT. The screen displays the name and number. The flashing cursor
appears at the end of the name. Use , and the dial pad keys to edit the name.
Press SELECT to move on to edit the number. Use to backspace and make
corrections. Press SELECT to move to edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.
Delete a Number/Name Stored in the Directory
1 Press
( ). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries stored in directory.
OR
Press the dial pad key for the first letter of the entry you want to delete.
3 When the screen displays the number you want to delete, press SELECT.
Then press until ERASE flashes.
4 Press SELECT. The screen displays ERASE NO YES and the number.
The current choice flashes.
5 Press until YES flashes.
6 Press SELECT. Youll hear a long beep confirming the deletion.
Telephone Directory
EDIT DIAL ERASE
9735550123
EDIT DIAL ERASE
9735550123
To Next Page
Loading...
Need help?
General
