VTech t2451 User Manual

7
Getting Started
Installation
4 Charge the Handset Battery.
Place the Handset in the Base. Charge the battery for at least 12 hours the
first time.
5 Check for Dial Tone.
After the batteries are charged, pick up the handset and press PHONE; you
should hear a dial tone.
6 Set the Dial Mode.
If you have touch tone service, the phone is ready to use as soon as the
batteries are charged.
If you have dial pulse (rotary) service, youll need to change the dial mode.
 Press PROG/CHAN on the Handset to enter programming mode.
 Press or until the screen displays DIAL MODE: and the
currently selected mode.
 Press SELECT. The current setting blinks.
 Press to select TONE or PULSE.
 Press SELECT to save the displayed mode.
7 Set Time and Date
If you subscribe to Caller ID service, the date and time will be set automatically with the
first incoming call.
If you do not have Caller ID service, you can set the date and time manually.
 Press PROG/CHAN, and then press
or until DATE/TIME is displayed.
Press SELECT.
 The month is flashing. Press
or until the screen displays the correct month.
Press SELECT.
 The day is flashing. Press
or until the screen displays the correct day.
Press SELECT.
 The hour is flashing. Press
or until the screen displays the correct hour.
Press SELECT.
 The minute is flashing. Press
or until the screen displays the correct minute.
Press SELECT.
 AM or PM is flashing. Press
or to choose between AM or P M.
Press SELECT.
8 Set Language Mode
 Press PROG/CHAN, and then press
or until LANGUAGE is displayed.
Press SELECT.
 The current setting blinks.Press
or until the screen displays the correct
language( English, Espanol or French ).

Press SELECT to save the language mode.

VTech t2451 Specifications

General

Brand	VTech
Model	t2451
Category	Cordless Telephone
Language	English