VTech Toot-Toot Drivers Amusement Park - Catapult Arm Securing; Catapult Lever and Track Support Attachment; Base Connector Attachment

11
11
11
B:Then,screwtheCatapult Arm into the back of the Roller
Coaster Structure, as shown in the picture.
C:Next,screwtheCatapult Lever and Catapult Track Support
to the Catapult Track, as shown below.
D:Finally,attachtheBase Connector to the Catapult Track
and Roller Coaster Structure as pictured. Once the Base
Connector is attached, it cannot be removed.