VTech Toot-Toot Drivers Amusement Park - Ramp Base Insertion; Hill Track Attachment; Slide Tracks Attachment

12
12
12
3. Insert the SmartPoint
TM
Ramp Base into the Roller Coaster
Structure, as shown below. You will hear a “click” sound to
indicate both pieces are secure.
4. Attach the SmartPoint
TM
Hill Track to the Hill Support. Then,
attach the SmartPoint
TM
Hill Track to the side of the Roller
Coaster Structure. You will hear a “click” sound to indicate the
pieces are secure.
5. Now,attachSlide Tracks A, B and C to the Roller Coaster
Structurefollowingthestepsbelow:
A:AttachSlide Track A to the Roller Coaster Structure, as
shown in the picture. You will hear a “click” sound to indicate
the piece is secure.
先安装房子和常
轨道