6
Warehouse
1. Lift up the warehouse, attach
it with the Smartpoint
TM
track
of the warehouse, you will
hear a loud ‘click’ sound to
indicate the track is securely
connected to the warehouse.
After the above steps, connect these pieces to the included track pieces.
You can congure them into different shapes.
GETTING STARTED
BATTERY INSTALLATION - TRAIN
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screw.
3. Install 3 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Getting Started
To Next Page
Loading...
