VTech VS112-37 - Predial Via Home Call and Cell Call; Chain Dialing

35
blocker is applicable to home calls
only.
Predial via home call and cell call
Predial a home call
Enter the telephone number, then press
or to dial.
Predial a cell call
1. Enter the telephone number.
2. Press on the handset to dial.
• If you have only one cell phone
connected to the telephone
base, it is automatically selected
to make cell calls.
• If you have two cell phones
connected to the telephone
base, the handset displays Select
a device. Press p/q to select
a cell phone and then press
MENU/SELECT.
NOTE
• When predialing (preview numbers
before dialing), press MUTE/DELETE
on the handset to backspace and
delete; press and hold REDIAL/
PAUSE to insert a dialing pause (a P
appears).
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial list
while you are on a call.
Chain dialing is useful if you wish to
access other numbers (such as bank
account numbers or access codes) from
the phonebook, caller ID log or redial
list.
Access a number in the phonebook
while on a call
1. Press MENU/SELECT .
2. Press MENU/SELECT to select
Phonebook .
3. Press p/q to scroll to the desired
entry or perform an alphabetical
search, then press MENU/SELECT to
dial the displayed number.
Access a number in the caller ID log
while on a call
1. Press MENU/SELECT.
2. Press p/q to scroll to Caller ID log,
then press MENU/SELECT.
3. Press p/q to scroll to the desired
entry, and then press MENU/SELECT
to dial the displayed number.