47
Turn on or off the call screening
Use this feature to choose whether
incoming messages can be heard over
the telephone base when they are being
recorded. If you turn call screening on,
you hear the incoming message.
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Answering
sys, then press MENU/SELECT .
3. Press p/q to highlight Ans sys setup,
then press MENU/SELECT twice to
select Call screening.
4. Press p/q to choose between On
and Off, then press MENU/SELECTto
save.
Screen a call with answering system
Screen calls at the cordless handset
If the answering system is on and a call
is being answered by the answering
system, the handset shows To screen
call press [SELECT] at the same time.
Press MENU/SELECT to screen the call
on your handset. The handset shows
the caller’s information. If you do not
subscribe to caller ID service, the
handset shows Screening....
Options while a message is being
recorded
• Press p/VOLUME/q on the
handset to adjust the call screening
volume.
• Press to switch between
speakerphone mode and handset
mode.
• Press to answer the call.
Screen calls at the base
If the answering system and call
screening are on, the announcement
and the incoming
message broadcast at the telephone
base when a call is answered by the
answering system.
Options while a message is being
recorded
• Press - VOL + on the telephone
base to adjust the call screening
volume.
• Press to temporarily turn
on the call screening if the call
screening is set to off.
To Next Page
Loading...
