VTech VT1301 - Connect Base Station; Connect Charger

4
SET UP THE TELEPHONE
2.3 Connect the Base Station
Plug the power cable into the base station, plug the other end of the power adapter
into the wall outlet not controlled by a wall switch.
Plug one end of the telephone line cord into the base station and the other end into
a telephone wall jack. If you have DSL high speed internet service, a DSL lter (not
included) is required.
NOTEs
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
Ensure power cord is fed through the slot on base so unit sits ush with the desk.
2.4 Connect the Charger
Plug the power cable into the charger base.
Plug the other end into the power wall socket and switch the power on.
NOTE
Ensure power cord is fed through the slot on the base so unit sits ush with the desk.
1.
2.
•
•
•
1.
2.
BS
HS
Power adapter cable