VTL TL6.5 - Page 44

[input][ON|OFF]
settings of inputs 1 – 8.
for example: >UNITY GAIN:
CD1,CD2
If queried on a particular input returns
that input’s unity setting, for example:
>UNITY GAIN: CD1 OFF
If commanded to set a particular input
for unity then returns current input’s
unity status, for example:
>UNITY GAIN: CD1
>DISABLE
[input]
For disabling unused
inputs.
Lists all disabled inputs, for example:
>DISABLED: CD1
>ENABLE
[input]
For re-enabling previously
disabled inputs.
Lists all enabled inputs: >ENABLED:
CD1,CD2,PHAUX1,AUX2,TUN,AU
X3,TAPE1,TAPE2
>COUNTDN
{ON|OFF}
For toggling between
muting and unmuting
the power up
countdown
Returns current countdown status.
>DSPLYOFF [n] For automatically
turning off the display
after last command after
programmed number of
seconds 0 – 99, with 00
for always on.
Returns current time, in seconds, that
display will shut off after last command,
for example:
>DSPLYOFF 00
>LOCKOUT
[ON|OFF]
For toggling between
front panel locked and
unlocked.
>LOCKOUT OFF for unlocked front
panel
>LOCKOUT ON for locked front
panel
>VTL Returns factory contact
info
Contact VTL:
Email: mail@vtl.com
Tel. 909-627-5944
Fax. 909-627-6988
>VERSION Returns the version
number of the software.
Installed version of the software:
TL6.5 Preamplifier Owner’s Manual
VTL
39