For Enhanced RIAA, left the header off of a pin in both locations. See photo
below.
8. Replace the cover
Put the cover of the preamplifier back onto the unit, insert and tighten all
screws.
9. Default Settings
Prior to shipping the TP2.5 Preamplifier, the following default settings are
configured in the preamplifier at the VTL factory unless your dealer has asked
specific settings to match with your cartridge.
MC Selected
MC Gain – 62 dB
MC Load – 47K
MM Load – 47 K
RIAA – standard
TP2.5 Preamplifier Owner’s Manual
VTL
12
To Next Page
Loading...
