Vuly 360 Pro - 5.3. Assembly - Onto the end of an existing 360 Pro Swing Set

13
5.3. Assembly – Cubby House onto the end of an existing 360 Pro Swing Set
1
STEP
A. Remove the one-way Top Joiner and associated frame-
end from the end of your 360 Pro Swing Set to which you
want to attach your Cubby House.
B. Disassemble and store these parts in a cool, dry place.
2
STEP
A. Connect the one-way Top Joiner into one end of one of
the Cubby Rails, and connect the other end into the two-
way Top Joiner.
3
STEP
Assemble the Cubby House, following 5.2. Assembly – Cubby
House only, from Step 3.
4
STEP
Slide the Rail Joiner at the end of your assembled Cubby
House into the end of the Swing (or Spin) Rail on your existing
360 Pro Swing Set.
You have attached your Cubby House onto the end of your Swing Set, and created a Vuly 360 Pro Play Set!
CONGRATULATIONS!
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.
B. Insert the second Cubby Rail into the other end of the
two-way Joiner, and the Rail Joiner into the end of that
Cubby Rail.
Ensure that you lock all parts together securely with Frame Bolts and Nuts.