Vuly 360 Pro - 6.2. Assembly - Play Set (Cubby end)

16
6.2. Assembly – Play Set (Cubby end)
1
STEP
A. Connect the one-way Top Joiner into one end of one of
the Cubby Rails, and connect the other end into the two-
way Top Joiner.
2
STEP
Assemble the Cubby House component of your Play Set,
following 5.2. Assembly – Cubby House only , from Step 3.
4
STEP
Slide the Rail Joiner at the end of your assembled Cubby
House into the end of the Swing (or Spin) Rail on the your
partly-assembled Swing Set.
3
STEP
Assemble the Swing Set component of your Play Set, following
the instructions packaged with the Swing Set, but leave one
side of the frame unassembled.
You have assembled your Vuly 360 Pro Play Set!
CONGRATULATIONS!
See your Swing instructions to attach your chosen Swings.
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.
B. Insert the second Cubby Rail into the other end of the
two-way Joiner, and the Rail Joiner into the end of that
Cubby Rai
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.