Vuly 360 Pro - 5.2. Assembly - Cubby House only

9
1x Cubby Rail 1x Rail Joiner 4x Frame Bolts
Additional, to attach to the end of an existing 360 Pro
Swing Set (to create a Play Set):
5.2. Assembly – Cubby House only
1
STEP
A. Connect the one-way Top Joiner into one end of a
Cubby Rail, and connect the other end into the two-way
Top Joiner.
B. Insert the End Tube, with Cap into the other end of the
two-way Joiner
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.
2
STEP
Insert four Frame Tubes into the bottoms of both Top Joiners,
as though you are ‘standing up’ the frame.
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.
3
STEP
Take one left and one right Frame Joiner, and insert them
into either side of a Frame Tube.
Ensure that you lock all parts together securely with Frame
Bolts and Nuts.