11
Remove one of the hanging springs from the frame, and hook it to the jump mat’s ‘D’ shackles.
Use the spring tool to hook it back onto the frame.
9
STEP
Continue attaching the springs equally around the
entire frame. Ensure that there is even spring pressure
as you attach.
10
STEP
Use the spring tool to remove the springs that you
initially attached to the frame before you laid the net
onto the trampoline. Re-attach these springs with the
net holes pushed over the buckles, as outlined in Step 7.
11
STEP
TRAMPOLINE | ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
