4
1.1. General care
• Retain this Manual.
• Inspect before and after each use.
• Replace any worn, deteriorated, defective or missing parts immediately and only through Vuly.
• Tighten all hardware, including elements that secure the system to the ground.
• Keep away objects that could damage textile components.
• Ensure that moving steel components remain well lubricated.
• Use only parts and accessories recommended by Vuly.
1.2. Rust and corrosion
• Be aware of, and check, areas that are particularly prone to rusting:
○ Places where water is easily trapped.
○ Hollow sections of steel (which can appear in good condition on the outside, while hiding rust on the inside).
○ Sections where steel components join together.
• Inspect the inside of all tubes every 6 months – as well as after rain – and remove any water from the inside surfaces.
• Use general-purpose grease on steel connection areas.
• Avoid cleaning steel components excessively; it may reduce the effectiveness of their protective coatings.
1.3. Textile deterioration
• Remove textile parts, and store them – in their original packaging – in a cool, dry and dark place when the system will be
unused for over 1 month. Prolonged exposure to UV sunlight can shorten the lifespan of textile materials.
1.4. Weather care
Components are susceptible to deterioration from use and environmental conditions – such as sunlight, rain, salt and heat – to
varying degrees.
If your system will be unused for any extended period, disassemble it, return it to its original packaging and store it in a dry place.
RAIN: Remove any fallen debris after rain and wipe off residual water with a dry cloth. Moisture left on the
WIND: Disconnect any accessories, and cover the frame with a storm cover.
HEAT: Cover when not in use to minimise UV damage.
COMPONENTS WILL DETERIORATE OVER TIME.
Record your date of purchase here:
1.0. Care and maintenance
Improper maintenance or lack of care can lead to your system deteriorating earlier than expected and causing injury.
Please follow these instructions to ensure that your product lasts for as long as possible.
To Next Page
Loading...
