EasyManua.ls Logo

Vuly Quest - Pre-Assembly; Parts Reference

Vuly Quest
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
2x 2-hole Climbing Rail
2x 3-hole Climbing Rail
2x Medium Climbing Bar
2x Curved Climbing Rail
2x Short Climbing Bar
2x Long Climbing Bar
3x Climbing Bar (Straight)
Install the system on level ground and in a well- lit area,
no less than 2 m (6 ft) from any structure or obstruction –
such as a fence, garage, house, overhanging branches,
laundry lines, or electrical wires.
Ensure that your chosen surface allows the system to be
firmly embedded with the included Anchor Kit or with
strong bolts.
Preference installing the system on a surface with
impact-attenuating properties – such as grass. A fall
onto a hard surface can result in serious injury or
death to the equipment user.
Check that you have all parts required for assembly.
Lock nuts and bolts securely.
Children must not use the equipment until properly
installed.
3.0. Pre-assembly
3.1. Parts Reference
DO NOT REMOVE PARTS FROM CARTONS UNTIL REQUIRED, OR MIX CARTON CONTENTS.
BOX A
ALL SIZES:
Part Colour: Orange

Related product manuals