14
Insert each Net Pole Plug into every
Upper Net Pole. Ensure that the
materials are not twisted and that the
Upper Net Pole is facing outwards.
10
STEP
11
STEP
A. Lift a Net Pole, raising the net at the same
time, and insert it into the Joiner Pole.
B. Repeat for each Net Pole until you have
completely erected the Safety Net.
9
STEP
A. Position a net fastener underneath a
leaf spring.
D. Pull the left loop towards the ground,
and pull the securing mechanism
through the loop hole.
E. Pull the left loop towards the ground,
and pull the securing mechanism
through the loop hole.
B. Bring a loop around each side of the
leaf spring. Move the loops under
the net, and pull through the net
button hole.
C. Pull the right loop towards the
ground, and pull the securing
mechanism through the loop hole.
Take your Rope Connector:
To Next Page
Loading...
