13
Safety Net
Go around your trampoline, inserting the remaining
Leaf Springs – one for each Frame section at a time –
and attaching them to the Mat, until you have inserted
and connected every Leaf Spring.
6
STEP
A. Unravel your Safety Net and lay it atop your trampoline mat.
B. Find the the Vuly Batch Tag on the Safety Net, and rotate the
Net so that this Batch Tag lines it up with the one on the Mat.
Ensure that the PP belts on the Safety Net are on the outside
and that they also line up with the Joiner Poles.
7
STEP
Connect each Upper and Lower Net Pole, and position them
at each Joiner Pole. The Lower Net Pole is the one that is
reinforced at the bottom.
Note: Your model will have safety sleeves on
the Lower Net Poles. Do not remove these safety
sleeves; ensure that they are at the top of your Lower
Net Poles when you insert the Upper Net Poles.
8
STEP
To Next Page
Loading...
