9
JM AGRI DESIGN. Derrymore East, Tralee, Co. Kerry, Ireland. M: +353 (0)87 2193062 E: jmoynihan@jmagridesign.com. 9
Before operating the machine, ensure that all safety guards are firmly in place and in good condition.
If worn or damaged, replace immediately.
Before operating the machine, check the tightness of all nuts and bolts, particularly on fixing
elements.
WARNING: Danger of crushing and shearing can exist when components are operated by
hydraulic or pneumatic controls
.
Before leaving the tractor or before adjusting, maintaining or repairing the machine, turn off the
engine, remove the ignition key and wait until all moving parts have come to a stop.
Keep clear of machine operating area.
Hydraulic System
WARNING: Hydraulic system is under pressure.
When fitting hydraulic valves or cylinders, ensure that connections have been made correctly,
Before connecting hoses to the tractor hydraulics, ensure that the tractor and machine circuits are not
under pressure.
It is strongly recommended that the operator marks the hydraulic connections between the tractor and
machine, to avoid making the wrong connection.
WARNING: Functions could be reversed. (for example: lift/lower).
Check hydraulic hoses regularly! Worn or damaged hoses must be replaced immediately.
Replacement parts must be in accordance with the manufacturers recommendations concerning
specifications and quality.
Should a leak be found, take all necessary precautions to avoid accidents.
Any liquid under pressure (particularly oil from hydraulics) can penetrate the skin and cause severe
injury. If injured, see a doctor immediately, there could be a danger of infection.
Before any adjustments, maintenance or repairs are carried out, lower the machine, depressurize the circuit,
turn off the engine and remove the ignition key.
To Next Page
Loading...
