VWR avantor CO 3100 H User Manual

Operation CO 3100 H
44
ba77074e05 05/2021
Example
Quitting the display To quit the display of stored measurement datasets, you have the fol-
lowing options:
 Switch directly to the measured value display with
<MODE>.
 Quit the display and move to the next higher menu level with
<F1>/
[Back].
5.5.4 Erasing the measurement data memory
How to erase the measurement data memory is described in section
5.5.3 D
ISPLAYING AND EDITING THE MEASUREMENT DATA MEMORY.
5.6 Transmitting data (USB interface)
5.6.1 Options for data transmission
Via the USB interface you can transmit data to a PC. The following
table shows which data are transmitted to the interface in which way:
15.03.2014 09:27:20
CO 3100 H
Ser. No. 12345678
ID number 1
ϰ 99.8 µS/cm 25.0 °C AR +++
________________________________________
15.03.2014 09:56:24
CO 3100 H
Ser. No. 12345678
ID number 1
ϰ 99.9 µS/cm 25.0 °C AR +++
________________________________________
Data Control Operation / description
Current mea-
sured values
of all connected
measuring cells
Manual  With
<F2>/[USB output].
 Simultaneously with every
manual storing process (see
section 5.5.1).
Automatic, at
intervals
 With
<F2__>/[USB output].
Then you can set the trans-
mission interval.
 Simultaneously with every
automatic storing process
(see section 5.5.2).

VWR avantor CO 3100 H Specifications

General

Brand	VWR
Model	avantor CO 3100 H
Category	Measuring Instruments
Language	English