What to do if VWR Scales are not turning on?
If your VWR Scales are not turning on, it could be due to discharged batteries. Try connecting the scales to the mains or changing the batteries. Another possibility is that the batteries are not installed correctly. Ensure that the batteries are installed with the correct polarization.
Why do VWR P2.H Scales turn off automatically?
Your VWR Scales might be turning off automatically because of a setting. In the “othr” submenu, change the “5.4 t1” setting to “no” to prevent this.
What to do if VWR P2.H display 'LH' after turning on?
If your VWR Scales display the message “LH” after turning on, it means the weight pan was loaded during the power-up sequence. Unload the pan, and the scale should then indicate zero.
Overview of the scale's purpose, applications, and primary functions.
Important safety guidelines for device operation, handling, and environmental conditions.
Information on accumulator type, charging procedures, and handling guidelines.
Procedures for cleaning ABS, stainless steel, and powder-coated parts.
Technical drawings and dimensions of the scale, including overall size.
Steps for safely unpacking and assembling the scale before first use.
Procedure to ensure the scale is level for accurate measurements.
Explanation of scale buttons and their operations in various modes.
Overview of the scale's user menu, submenus, and parameter groups.
Basic steps for placing loads and obtaining measurements on the scale.
How to subtract the weight of a container or packaging to determine net weight.
Manually entering a tare value into the scale's memory.
Resetting the scale to zero for accurate measurements.
Setting the primary unit of measurement for the scale's operation.
Adjusting the filter to improve stability in different environmental conditions.
Using filters and autozero for enhanced measurement accuracy.
Configuring RS232 communication settings and printout types.
Adjusting display backlight and audible feedback for user convenience.
Configuring the scale to turn off automatically after inactivity.
How to check the current battery level and status.
Enabling or disabling specific scale operation modes.
Using the scale for counting identical items by sample quantity.
Setting upper and lower weight limits for acceptable measurements.
Defining the reference mass for deviation checks by weighing or memory.
Automatically tares containers for net weight determination.
Steps for accumulating multiple weighings and documenting results.
Specific mode for weighing live animals, including duration setting.
Storing and recalling tare values from the scale's memory.
Steps for calibrating the scale for accuracy using external weights.
Integrating printers and computers via RS232 interface using cable diagrams.
Overview and list of commands for RS232 communication.
Detailed explanation of available RS232 commands and their functions.
List and explanation of error messages displayed by the scale.
Solutions for common scale problems and their causes.
To Next Page
General
