VXI D200 User Manual

VXi D200 Dialpad
Warranty
1. VXi warrants that your D200 Dialpad will be free from defects in mate-
rial and workmanship for one year from the date of purchase. If, during
the rst year from the date of purchase, your D200 Dialpad fails to work
due to a defect in material or workmanship, VXi will repair or replace the
product, at its election, free of charge. Without proof of purchase, the
warranty period begins on the date of manufacture.
2. The foregoing limited warranty does not cover equipment failure at-
tributable to accident, improper operation, misuse, abuse, or any cause
other than defects in the materials or workmanship of VXi’s products.
3. VXi’s obligations under this warranty are limited to repair or replace-
ment (at our option) of any defective part returned to VXi at the cus-
tomer’s expense. Returned products require a Return Authorization that
may be obtained by calling 1-800-742-8588. Products returned to VXi for
repair under this warranty will be return shipped to the customer at VXi’s
expense.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdic-
tions do not permit the exclusion of implied warranties and the forego-
ing exclusions may not apply to you.
5. In no event shall VXi be responsible for any other damages whatsoever,
including direct, indirect, special, incidental, consequential, or other
damages for breach of this or any other warranty, express or implied.
271 Locust Street • Dover, NH 03820 USA • 800-742-8588 • 603-742-2888
www.vxicorp.com ©VXi Corporation 2010 PN202933B Printed in China
Connecting you to the world.

VXI D200 Specifications

General

Brand	VXI
Model	D200
Category	Telephone Accessories
Language	English

Summary

Warranty Information

Limited Warranty Coverage

Covers defects in material and workmanship for one year from date of purchase.

Warranty Exclusions

Excludes failures from accident, misuse, abuse, or causes other than product defects.

Repair and Replacement Process

VXi will repair or replace defective parts at its option; requires Return Authorization.

Disclaimer of Other Warranties

This warranty is in lieu of all other express or implied warranties.

Limitation of Damages

Limits VXi's responsibility for indirect, special, or consequential damages.

Dialpad Operation

Redial Function

Automatically dials the last number dialed using the REDIAL button.

Mute/Unmute Call

Mute your voice during a call by pressing the MUTE button.

Pause Button Usage

Use the PAUSE button after dialing access numbers or for services.

Call Waiting Handling

Answer or return to a first call using the FLASH button.

Call Transfer Procedure

Transfer a call by pressing FLASH, dialing the number, and hanging up.

Device Features

Indicator LEDs

Explains the function of the In Use/Ringer LED and Mute LED.

Control Buttons

Describes the Redial, Pause, On/Off, and Mute buttons.

Connectivity Ports

Details the Telephone line, Extension, Headset, and Recording jacks.

Volume Controls

Explains how to adjust Speaker and Microphone volume.

Introduction and Setup

Package Contents

Lists items included in the box: Dialpad, Line Cord, Headset Hook.

Ringer Volume Adjustment

Adjust ringer volume using the RING switch to HI, LOW, or OFF.

Flash Settings Configuration

Set the switch to A or B to enable call transfer.

Mode Settings for Phone Type

Set the switch to 'T' for touch tone or 'P' for rotary phones.

Recording Jack Usage

Connect a recording device or second headset to this port.

Extension Jack Usage

Connect the dialpad to a second phone using an RJ-11 cord.

Installation and Usage

Connecting the Line Cord

Plug the Line Cord into the wall jack and the D200 TEL jack.

Connecting the Headset

Attach a headset to a cord and plug into the HEADSET jack.

Important Connection Delay

Wait 10 seconds after connecting the phone line before use.

Placing a Call

Position headset, press ON/OFF button; In Use LED will light.

Speaker Volume Adjustment

Rotate SPK-VOL wheel until earpiece volume is acceptable.

Microphone Volume Adjustment

Rotate MIC-VOL wheel until voice is heard clearly and comfortably.

Answering and Ending Calls

Press ON/OFF button to answer a ringing call and to end it.