VXI Tria User Manual

1. ATTACH A HEADBAND OR EAR HOOK
2. ATTACH EAR CUSHION
Behind-the-neck Over-the-head
Over-the-head Over-the-ear
Behind-the-neck
HEADSET
TRIA
™
 AMPLIFIER CONNECTION: Connect Tria to the amplifier’s headset cord.
 DIRECT CONNECT TO HEADSET-READY PHONE: Connect Tria to a lower cord that is compatible with your phone. Then connect
lower cord into the phone’s headset port. Some phones allow connection to the handset port (consult the phone’s manual).
 COMPUTER CONNECTION: Connect Tria to a VXi USB cord or a VXi sound card cord (sold separately).
For technical support or product information please call VXi at 800-742-8588 or 603-742-2888
Over-the-ear (cushion optional)
FLAT
SIDE
Fig. B
Fig. A
Position the microphone about
one finger’s width away from
your face near the corner of your
mouth (Figure A). The flat side of
the microphone housing is the
talk-side (Figure B). This side must
face your mouth.

VXI Tria Specifications

General

Connectivity technology	Wired
Microphone	Yes
Frequency Response	20 Hz - 20 kHz
Connection	3.5mm
Microphone Frequency Response	100 Hz - 10 kHz
Impedance	32 Ohm

Summary

Attaching Headband or Ear Hook

Microphone Positioning

Position microphone one finger's width from face, near mouth corner. Flat side faces mouth.

Attaching Ear Cushion

Connection Methods

Amplifier Connection

Connect headset to amplifier's headset cord.

Direct Phone Connection

Connect headset to phone's headset port via compatible lower cord.

Computer Connection

Connect headset to computer via VXi USB or sound card cord.

VXI Limited Warranty