WABCO ABS/EBS B-DH A101 - Safety Information; Observe All Required Provisions and Instructions; Make Provisions for a Safe Work Environment; Do Not Use the ABS;EBS Code Reader in the Vicinity of:

9
Safety information
EN
2 Safety information
Observe all required provisions and instructions:
 Read this publication carefully.
Adhere to all instructions, information and safety information to prevent injury to persons and damage to
property.
WABCO will only guarantee the safety, reliability and performance of their products and systems if all
the information in this publication is adhered to.
 Always abide by the vehicle manufacturer's specications and instructions.
 Observe all accident regulations of the respective company as well as regional and national regulations.
Make provisions for a safe work environment:
 Only trained and qualied technicians may carry out work on the vehicle.
 Use personal protective equipment if required (protective goggles, respiratory protection, ear protectors,
etc.).
 Pedal actuations can lead to severe injuries if persons are in the vicinity of the vehicle. Make sure that
pedals cannot be actuated as follows:
 Switch the transmission to "neutral" and actuate the hand brake.
 Secure the vehicle against rolling by using chocks.
 Fasten a visible note to the steering wheel indicating that work is being performed on the vehicle and
that the pedals are not to be actuated.
 Do not use the ABS/EBS Code Reader in the vicinity of:
 heat sources
 magnetic elds
 exhaust gases
 sources of electricity.
 Do not expose the ABS/EBS Code Reader to impact, shock or moisture (water or other liquids).