WABECO D2000E - Page 3

3
Index
10.2.1 General note 36
10.2.2 Application of change gears 36
10.2.3 Altering the feeds or thread pitches 37
10.2.4 Changing of feeds or thread pitche D3000 E 39
11. Pair of toothed wheels for left-hand thread 40
12. Angle plate with milling table 41
13. Three jaw-chuck and four jaw-chuck 42
14. Tool holder with conical sleeve 42
15. Steady and follow rest 43
16. Square turret head 43
17. Hand tool rest for turning wood 44
18. Wood turning lathe centre 44
19. Unit for lubrication coolant 45
20. Declaration of noise levels in accordance with DIN EN 24871 46
(German Industrial Standard)
21. Disposal of the lathe 46