2
Index
EC-Conformity Declaration 4
1. Product range 6
1.1 Universal Lathe D2000 E 6
1.2 Universal Lathe D2400 E 7
1.3 Universal Lathe D3000 E 8
2. Drawings and list of parts 9
2.1 Headstock 9
2.2 Support with motor and cover for D2400 E, D3000 E 10
2.3 Leading spindle drive for D2000 E, D2400 E 12
2.4 Leading spindle drive for D3000 E 14
2.5 Antrieb mit Vorgelege zu D2000 W 16
2.6 Cross table 18
2.7 Tailstock 20
2.8 Rear support with guide rods 21
3. Circuit diagram 22
3.1 Circuit diagram for D2000 E, D2400 E 22
3.2 Circuit diagram for D3000 E 23
4. Delivery and installation 24
5. Starting-up and maintenance 25
6. Overload protection 25
7. Safety devices and recommendations 26
8. Startup and Maintenance 27
8.1 Electrical equipment 27
8.2 Startup 27
8.3 Maintenance 28
8.4 Lubrication 29
8.5 Initial cleaning of the machine 29
8.6 Spindle head 30
8.7 Compound rest 31
8.8 Tailstock 29
9. Speed regulation 32
9.1 Speed election 32
9.1.1 Speed setting for working with aluminium 32
9.1.2 Speed setting for working with steel 32
9.1.3 Speed setting for working with Brass, Copper 33
9.2 Changing of speed 33
10. Applications 34
10.1 Longitudinal and transverse turning 34
10.2 Thread cutting and automatic feed 35
To Next Page
Loading...
