WABECO F1210 - Page 4

4
Index
4.5 F1210-F1210hs 30
4.5.1 Declarationofnoiselevels 30
4.5.2 Technicaldata 31
4.5.3 DimensionsofF1210(1.4kW) 32
4.5.4 DimensionsofF1210hs(2.0kW) 33
4.6 F1210-C-F1210-Chs 34
4.6.1 Declarationofnoiselevels 34
4.6.2 Technicaldata 35
4.6.3 DimensionsofF1210-C(1.4kW) 36
4.6.4 DimensionsofF1210-Chs(2.0kW) 37
4.7 CC-F1210-CC-F1210hs 38
4.7.1 Declarationofnoiselevels 38
4.7.2 Technicaldata 39
4.7.3 DimensionsofCC-F1210(1.4kW) 40
4.7.4 DimensionsofCC-F1210hs(2.0kW) 41
4.8 Revolution setting 42
4.9 Electricalequipment1.4kWmotor 43
4.10 Electricalequipment2.0kWmotor 43
5. Achieving optimum results 43
and avoiding incorrect usage
6. Installation and removal of collets 45
6.1 Installation 45
6.2 Removal 45
7. Fitting and removing the tools 46
8. Swiveling the milling head 48
9. Drill stroke - depth stop 49
10. Feed motions of the X-, Y- and Z-axes 50
11. Adjustment of the spindle nuts with trapezoidal thread spindle 52
11.1 X-andY-axes 52
11.2 Z-axis 53
12. Adjustment of the dovetail guides 54
13. Maintenance 55
14. Lubrication of the machine 55
15. Operational faults and the elimination of such 57
16. Control elements 60
16.1 Milling machines F1200 - F1210 (1.4 kW) 60
16.2 Milling machines F1200 hs - F1210 hs (2.0 kW) 61
16.3 MillingmachinesF1200-C-F1210-C(1.4kW) 62
16.4 MillingmachinesF1200-Chs-F1210-Chs(2.0kW) 63