5-26 BA 1001/1501/2001 us – Edition 3.3 * * 12001b530.fm
Maintenance
5.10 Tires
Tire wear can vary according to work and ground conditions.
Accident hazard due to incorrect tire repairs!
Can cause severe injury or death.
• All repair work on tires and rims may only be performed by a Wacker Neuson
service center.
☞We recommend checking the tires for wear and the wheel nuts for tightness once a day.
☞Park the machine on firm and level ground to check and perform maintenance.
Checking the tires at regular intervals increases operational safety and the ser-
vice life of the tires, and reduces machine downtimes. Please refer to technical
data for the approved tire types and the correct tire pressures.
Replace tires after 6 years (irrespective of condition) and dispose of them correctly.
Inspection work
☞Perform the following maintenance once a day:
• Visual check of the tire condition
• Check the tire pressure
• Tire and rim (outside and inside) for damage
• Check for wear
• Remove foreign bodies from the tire tread
• Remove traces of oil and grease from the tires
Maintenance
To Next Page
