Wacker Neuson 1404

5-38 BA 1404 en – Edition 2.7 * * 1404b540.fm
Maintenance
5.18 Maintenance plan (overview) Work description For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance work
(daily)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 1500 o/h
Every 2000 o/h
Customer
Authorized
service center
Fluid and filter changes ( ): Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●●
• Engine oil filter
2
●●
• Fuel filter
3
●●
• Air filter element according to dirt indicator
4
●●
• Coolant ●● • Hydraulic oil filter insert
5
●●
• Hydraulic oil
6
●● ●
• Hydraulic oil reservoir breather filter ●● • Cabin air filter of heating system ●● • Drain condensation water from the hydraulic oil reservoir (from serial no. AH02272) ●●
• Drive gearbox oil
7
●● ●
Inspection work ( ): Check the following material. Refill if necessary:
• Engine oil ●● • Engine coolant ●● • Hydraulic oil ●● • Fuel ●● • Drive gearbox oil ● ●
Clean water ducts
8
●●
Check pedal function ●● Check radiator for engine and hydraulic oil for dirt. Clean if necessary ●● Check cooling systems, heating and hoses for leaks and pressure (visual check) ●●
Maintenance