Need help?Do you have a question about the Wacker Neuson BPU 3050A and is the answer not in the manual?
General| Compaction Force | 30 kN |
|---|---|
| Frequency | 90 Hz |
| Centrifugal Force | 30 kN |
| Engine Power | 4.1 kW |
| Operating Width | 50 cm |
| Transport Width | 50 cm |
| Engine Type | Air-cooled, single-cylinder, four-stroke |
Explains the state of the art and proper/improper use of the machine.
Details requirements for operators, including age, fitness, and training.
Lists required personal protective equipment for safe operation.
Covers work environment, vertical stability, operator position, and danger zones.
Outlines safety measures related to engine operation and refueling.
Explains the importance and location of safety labels on the machine.
Provides specifications for the vibrating plate models.
Details specifications for the engine used in the machine.
Lists technical details related to the exciter component.
Explains the working principle of the vibratory plate.
Provides instructions for safely transporting the vibratory plate.
Offers advice for effective compaction, including on slopes.
Details pre-operation checks for the engine and its systems.
Step-by-step guide for starting the machine's engine.
Instructions for operating the engine after starting, including the oil alert system.
Explains how to control the machine's direction of movement.
Procedures for safely shutting down the machine's engine.
Outlines the recommended maintenance jobs and intervals.
Instructions for checking and changing the engine oil.
Guidance on checking and maintaining the hydraulic control system.
Procedures for checking and changing oil in the exciter.
Instructions for checking and adjusting the exciter V-belt.
Steps for cleaning the fuel strainer cup.
Guide for inspecting, cleaning, and replacing the spark plug.
Steps for adjusting the carburettor for optimal performance.
Instructions for inspecting and cleaning the air filter element.
Identifies causes and remedies for low reverse speed.
Identifies causes and remedies for low forward speed.
Lists potential causes and solutions for the machine not moving forward.
Explains causes of hydraulic oil loss and how to address it.
Provides common reasons and solutions for the engine failing to start.
Explains Wacker Neuson's approval for oxygenated fuels and their usage.
To Next Page