EasyManua.ls Logo

Wacker Neuson BPS1030 - User Manual

Wacker Neuson BPS1030
50 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator’s Manual
Vibration Plate
BPS
Machine Type BPS1030, BPS1135, BPS1340
Material Number 5100060589
Version 2
Date 07/2021
Language [us]
5100060589

Table of Contents

Questions and Answers

  • T
    tamaralyonsAug 10, 2025
    What to do if my Wacker Neuson Power Tool engine cannot be started?
    • J
      Jeffrey HarmonAug 10, 2025
      If your Wacker Neuson Power Tool engine won't start, several factors could be the cause. First, ensure the engine switch is on and the throttle lever is correctly positioned. Check that the fuel cock is open and that there is sufficient fuel in the tank, inspecting the fuel filter and lines. Low engine oil can also prevent starting, so add oil if needed. Other potential issues include incorrect valve clearance (which may need adjustment), worn valves (requiring repair), worn cylinder or piston ring, or worn spark plugs.
  • K
    kellyclarkAug 26, 2025
    Why is there no vibration when my Wacker Neuson Power Tool engine is running?
    • H
      harringtonjonathanAug 26, 2025
      If you notice a lack of vibration while the engine of your Wacker Neuson Power Tool is running, it could be due to a worn V-belt, which requires replacement. Alternatively, the clutch linings might be worn out, necessitating their replacement.

Wacker Neuson BPS1030 Specifications

General IconGeneral
Vibration Frequency98 Hz
Fuel TypeGasoline
Power SourceGasoline Engine
Operating Width300 mm
Fuel Tank Capacity3.1 L
Travel Speed24 m/min
Engine TypeAir-cooled, single-cylinder, 4-stroke, gasoline engine

Related product manuals