BS 30 6 Maintenance
Operator's manual 19
6.3 Troubleshooting
Problem / Symptom Reason / Remedy
Engine does not start, or stalls - No fuel in tank.
- Spark plug fouled.
- Fuel valve closed
Engine does not accelerate, is hard to start,
or runs erratically
- Improper fuel mix. Too much oil.
- Spark plug fouled.
- Clean muffler and exhaust port.
- Crankshaft seals are leaking.
- Check air cleaner
Engine overheats - Improper fuel mix. Not enough oil.
- Clean cooling fins and fan blades
Engine runs, rammer does not tamp - Inspect clutch for damage. Replace if
necessary.
- Broken connecting rod or crankgear.
- Low engine performance.
Compression loss. Plugged exhaust
port.
Engine runs, rammer operation is erratic - Oil/grease on clutch.
- Broken/worn springs.
- Soil buildup on ramming shoe.
- Broken parts in ramming system or
crankcase.
- Engine operating speed is too high.
To Next Page
Loading...
