BS 30 3 Safety Information
Operator's manual 9
16. Always be sure the rammer will not tip over, roll, slide, or fall when not being
operated.
17. Always turn the engine OFF when the rammer is not being operated.
18. Always guide the rammer in such a way that the operator is not squeezed
between the rammer and solid objects. Special care is required when working
on uneven ground or when compacting coarse material. Make sure to stand
firmly when operating the machine under such conditions.
19. When working near the edges of breaks, pits, slopes, trenches and platforms,
always operate the rammer in such a way that there is no danger of it tipping
over or falling in,
20. Store the machine properly when it is not being used. The machine should
be stored in a clean, dry location out of the reach of children.
21. Close fuel valve on engines equipped with one when machine is not being
operated.
22. Always operate machine with all safety devices and guards in place and in
working order. Do not modify or defeat safety devices. Do not operate
machine if any safety devices or guards are missing or inoperative.
To Next Page
Loading...
Need help?
General
