EasyManuals Logo

Wacker Neuson BS 60-4s User Manual

Wacker Neuson BS 60-4s
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Maintenance BS 60-4s
30 wc_tx001401gb.fm
5.4 Engine Oil
See Graphic: wc_gr002431
5.4.1 Drain the oil while the engine is still warm.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
5.4.2 Place the rammer so that the engine is level.
5.4.3 Remove the oil fill plug (a) and the drain plug (b) to drain the oil.
5.4.4 Install the drain plug (b).
5.4.5 Fill the engine crankcase with the recommended oil up to the level of
the plug opening (c). Do not thread in the dipstick to check the oil level.
See section Technical Data for oil quantity and type.
5.4.6 Install the oil filler plug (a).
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged peri-
ods of time.
f Take steps to avoid inhaling or ingesting used engine oil.
f Wash skin thoroughly after exposure to used engine oil.
wc_gr002431
a
b
c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BS 60-4s and is the answer not in the manual?

Wacker Neuson BS 60-4s Specifications

General IconGeneral
BrandWacker Neuson
ModelBS 60-4s
CategoryPower Tool
LanguageEnglish

Related product manuals