BS 60-4 Basic Troubleshooting
wc_tx001402gb.fm 37
On machines equipped with
the low oil shutoff switch, the
engine starts and continues to
run but the low oil warning
light stays on continuously.
• Check the switch for proper wire connections.
• Switch is not functioning properly. Replace the
switch.
On machines equipped with
the low oil shutoff switch, the
engine starts and continues to
run, but the low oil warning
light did not flash quickly once.
• Check the switch for proper wire connections and
grounding.
• Switch is not functioning properly. Replace the
switch.
Problem / Symptom Reason / Remedy
To Next Page
Loading...
