Wacker Neuson BS 70-2 User Manual

Labels BS 60-2 / BS 70-2
18 wc_si000475gb.fm
D
Warning!
Springs are compressed. Release cover slowly to
avoid spring ejection.
See the Repair Manual for proper disassembly
instructions.
E
Move lever forward to stop machine. Move lever
backward to run machine.
This label is molded into the cover. If the label
becomes illegible, the cover must be replaced.
Refer to the Parts Book for ordering information.
F
For optimal control, performance, and minimal hand/arm
vibration, grasp handle as shown.
Read the Operator’s Manual.
This label is molded into the cover. If the label
becomes illegible, the cover must be replaced.
Refer to the Parts Book for ordering information.
Ref. Label Meaning
115416

Wacker Neuson BS 70-2 Specifications

General

Brand	Wacker Neuson
Model	BS 70-2
Category	Vibratory rammers & tampers
Language	English